Skip to main content

PROTAX GUIDES

How to File Form PAS-6 for Share Capital Reconciliation

File Form PAS-6, the half-yearly Reconciliation of Share Capital Audit Report, on MCA V3 within 60 days. Due dates, ISIN, certification, fees, and penalties.

How to File Form PAS-6 for Share Capital Reconciliation

Form PAS-6 is the half-yearly Reconciliation of Share Capital Audit Report that an unlisted public company or a private non-small company files with the Registrar of Companies to reconcile its issued capital with the shares actually held in dematerialised and physical form. It is governed by Rule 9A of the Companies (Prospectus and Allotment of Securities) Rules, 2014, extended to private companies through Rule 9B, and is filed as a web-based form on the MCA V3 portal. The form is due within sixty days from the end of each half year, by 30 May for the October to March period and by 29 November for the April to September period, and it must be certified by a practising professional. This guide covers who must file, what the form reports, the step-by-step filing process, the fee and penalty position, and how PAS-6 connects to the dematerialisation of private company shares.

  • What it is: a half-yearly Reconciliation of Share Capital Audit Report under Rule 9A(8) of the Companies (Prospectus and Allotment of Securities) Rules, 2014.
  • Who files: every unlisted public company under Rule 9A and every private non-small company under Rule 9B, once it has an ISIN.
  • Due dates: within 60 days of each half year, so 30 May for the October to March half and 29 November for the April to September half.
  • Certification: the form must be certified by a practising professional who signs with their membership or COP number and a Digital Signature Certificate.
  • Per ISIN: the reconciliation is prepared separately for each ISIN, comparing issued capital with shares held in NSDL, CDSL, and physical form.
  • Penalty risk: non-filing draws an additional fee plus the general penalty under Section 450 of the Companies Act, 2013.

What Is Form PAS-6?

Form PAS-6 is the half-yearly Reconciliation of Share Capital Audit Report that an unlisted public company or a private non-small company submits to the Registrar of Companies to confirm that its issued capital matches the shares held in dematerialised and physical form. It is mandated under Rule 9A(8) of the Companies (Prospectus and Allotment of Securities) Rules, 2014, and certified by a practising professional.

The form exists because of a wider shift away from physical share certificates. The Ministry of Corporate Affairs (MCA) inserted Rule 9A through a notification dated 10 September 2018, effective 2 October 2018, requiring unlisted public companies to issue securities only in dematerialised form and to dematerialise their existing securities. PAS-6 was then notified through the Companies (Prospectus and Allotment of Securities) Third Amendment Rules, 2019, vide G.S.R. 376(E) dated 22 May 2019, effective 30 September 2019, as the half-yearly check that the dematerialised position and the company's books agree.

At its core, PAS-6 is a transparency and anti-fraud measure. Physical share certificates can be forged, duplicated, or transferred without a clear trail, so the MCA pushed unlisted companies toward the depository system that already governs listed shares. The reconciliation forces a company to compare, every six months, the capital it has issued on paper with the capital actually sitting in National Securities Depository Limited (NSDL) and Central Depository Services Limited (CDSL). Where the two figures diverge, the company must explain why and notify the depositories, which keeps the share register honest and current.

Why PAS-6 Matters for Your Company

For a company, PAS-6 is more than a tick-box filing. It is a recurring audit of the integrity of your cap table. A clean reconciliation signals to investors, acquirers, and lenders that your share records are reliable, which matters during due diligence for funding rounds, share transfers, and exits. A mismatch left unexplained, by contrast, is a red flag that can stall a transaction. Filing PAS-6 accurately each half year keeps your private limited company compliance in order and avoids the additional fee and penalty exposure that comes with a missed deadline.

Form PAS-6 is governed by Rule 9A(8) of the Companies (Prospectus and Allotment of Securities) Rules, 2014, inserted by the Third Amendment Rules, 2019 (G.S.R. 376(E) dated 22 May 2019). It was extended to private non-small companies by Rule 9B through the Second Amendment Rules, 2023. The form is administered by the Ministry of Corporate Affairs (MCA) and filed on mca.gov.in. Wrong certification attracts liability under Section 448 of the Companies Act, 2013.

Who Has to File Form PAS-6?

PAS-6 applies to two broad groups: unlisted public companies under Rule 9A and private non-small companies under Rule 9B. The common trigger is mandatory dematerialisation, which obliges these companies to obtain an ISIN and then reconcile their capital twice a year. Listed companies sit outside PAS-6 because they already report to stock exchanges under SEBI depository regulations.

The reach of the form widened sharply in 2023. Until then, only unlisted public companies filed PAS-6. The Companies (Prospectus and Allotment of Securities) Second Amendment Rules, 2023 inserted Rule 9B, which made dematerialisation mandatory for private companies that are not small companies. Crucially, Rule 9B(5) states that sub-rules (4) to (10) of Rule 9A apply mutatis mutandis to dematerialisation under Rule 9B. Because Rule 9A(8) is the PAS-6 filing requirement, it now flows through to private non-small companies in identical form. This pulled a large population of growing private companies into a half-yearly filing they had never faced before.

Applicability and Exemptions at a Glance

Company TypePAS-6 Applicable?Governing Rule
Unlisted public companyYesRule 9A
Private company (not a small company)YesRule 9B
Section 8 company with share capitalYes (if not small / exempt)Rule 9A or 9B
Small private companyNoExempt under Rule 9B
Nidhi companyNoExempt under Rule 9A
Government company (public or private)NoExempt
Wholly owned subsidiary (of unlisted public company)NoExempt
Listed companyNo (files SEBI reconciliation instead)SEBI regulations

The exemptions follow a clear logic. Nidhi companies and government companies operate under tailored regimes, and wholly owned subsidiaries already sit within a parent's consolidated structure, so a separate half-yearly reconciliation adds little. Small companies are spared to keep the compliance burden proportionate to their size. Everyone else with share capital, once dematerialised, files PAS-6 every six months. The single most important point is that the duty attaches to non-small private companies now, not only public companies, which is the change most owners underestimate.

The most frequent error since 2023 is a private company assuming PAS-6 is only a public-company form. After Rule 9B, every private company that is not a small company must dematerialise its shares and then file PAS-6 each half year. Check your small-company status against the paid-up capital and turnover thresholds every year, because crossing them quietly pulls you into Rule 9B and the PAS-6 obligation.

What Makes a Company a Small Company

A small company under Section 2(85) of the Companies Act, 2013 is a private company whose paid-up share capital does not exceed ₹4 crore and whose turnover does not exceed ₹40 crore, within the limits the Central Government notifies. A company that stays within both thresholds is exempt from PAS-6. The moment it crosses either limit, it loses small-company status, must dematerialise under Rule 9B, and begins filing PAS-6. Public companies, holding companies, and subsidiaries can never be small companies regardless of size, so they are covered from the start if otherwise eligible.

A Quick Decision Checklist: Should You File PAS-6?

Use the following checklist to settle applicability in a few minutes before you commit time to a filing. Work through it in order, stopping at the first answer that resolves your position.

  • Is the company listed on a stock exchange? If yes, you do not file PAS-6; you submit the quarterly reconciliation to the exchanges under SEBI depository regulations instead.
  • Is it an unlisted public company? If yes, and it is not a Nidhi company, a government company, or a wholly owned subsidiary, you are covered under Rule 9A and must file PAS-6.
  • Is it a private company? If yes, test the next two questions to decide.
  • Is paid-up capital up to ₹4 crore and turnover up to ₹40 crore? If both are within the limits, it is a small company and is exempt; if either is crossed, continue.
  • Is it a government company or a wholly owned subsidiary of an unlisted public company? If yes, it is exempt; if no, it is covered under Rule 9B and must file PAS-6.
  • Does the company have an active ISIN? If not, complete dematerialisation and obtain an ISIN first, because PAS-6 cannot be filed without one.

The checklist resolves the vast majority of cases. The only genuinely borderline situations are companies sitting right on the small-company thresholds and Section 8 companies with share capital, where the safer course is to treat the company as covered and confirm the position with a qualified professional. An unnecessary filing costs a few hundred rupees; a missed one compounds into a per-day additional fee and a Section 450 penalty, so the asymmetry favours filing when in doubt.

What Does Form PAS-6 Report?

PAS-6 is a structured reconciliation, not a narrative. Every field is designed to surface a gap between what the company has issued and what the depositories actually hold. The form is prepared for each ISIN separately, so a company with more than one type of security files a distinct reconciliation for each.

The heart of the form is the capital table. It records issued capital, shares held in dematerialised form in CDSL, shares held in dematerialised form in NSDL, and shares held in physical form, then totals the held figures. If the issued capital and the total held capital do not match, the company must state the reason. This is the single most scrutinised part of the form, because an unexplained difference points to either a record-keeping lapse or a deeper problem in the share register. Under Rule 9A(8A), any such difference must also be brought immediately to the notice of the depositories, so the reconciliation is not a passive disclosure but a trigger for corrective action.

The Core Data Fields in PAS-6

Field GroupWhat It CapturesWhy It Matters
Company and security identityCIN, registered office, ISIN for each securityAnchors the filing to a specific company and security
Capital detailsIssued capital, demat in CDSL and NSDL, physical shares, total heldThe core reconciliation of issued versus held capital
Difference and reasonsGap between issued and held capital with explanationFlags record-keeping or register problems
Changes in share capitalRights, bonus, private placement, ESOP, conversion, buyback, capital reduction, forfeitureTracks every movement in capital during the half year
Promoter, director, KMP holdingTheir shares split between demat and physical formConfirms the demat mandate on insiders is met
Register of Members statusWhether the register is updated and to which dateShows whether the books reflect recent allotments
Demat request delaysRequests confirmed after 21 days or pending beyond 21 days, with reasonsSurfaces bottlenecks with the RTA or depository
Certifying professionalName, registration number, and certification of the practising professionalEstablishes independent verification and Section 448 liability

Two field groups deserve special attention. The changes-in-capital table asks, for each type of corporate action, whether the change was intimated to both NSDL and CDSL, which is how the depository records stay in step with company actions. The demat-request table, meanwhile, exposes operational friction: a depository should confirm a dematerialisation request within 21 days, so a long list of requests pending beyond that window points to a problem with the company, its Registrar and Transfer Agent, or the depository that needs fixing before it distorts the next reconciliation.

The Register of Members field is a quieter but equally telling part of the form. PAS-6 asks whether the register is updated and, if not, the date up to which it has been maintained. A register that lags behind the depository position is the single most common root cause of an unexplained reconciliation difference, because shares can be credited in demat form before the company records the movement in its own books. The form also asks whether dematerialised shares were in excess in the previous half year and whether that excess has since been resolved, which forces a company to close out a prior discrepancy rather than carry it indefinitely. Together these fields make PAS-6 a self-correcting record: a problem disclosed in one period is expected to be resolved by the next, and a recurring entry is a clear signal that something in the share register or the depository link needs attention.

In the half-yearly filings we handle, the difference between a five-day PAS-6 and a three-week scramble is almost always the Benpos statement. Companies that request their beneficial position statements from NSDL and CDSL as on the exact half-year end date, in the first week after 31 March or 30 September, reconcile cleanly. Those that leave it late find the depository data and the books drifting, then spend days chasing the cause of a gap that a timely Benpos pull would have caught immediately.

PAS-6 Due Dates and the Half-Yearly Cycle

PAS-6 runs on a fixed half-yearly rhythm tied to the financial year. The form is prepared for the half years ending 31 March and 30 September, and it must be filed within sixty days from the end of each half year. This produces two firm deadlines that recur every year and do not depend on when the company was incorporated or when it dematerialised.

Half-Year PeriodHalf-Year End DatePAS-6 Due DateWindow
April to September30 September29 November60 days from 30 September
October to March31 March30 May60 days from 31 March

The practical takeaway is to build two annual reminders, one in early October and one in early April, to start the reconciliation the moment each half year closes. Pulling the Benpos statements early leaves a comfortable buffer for reconciliation, capital-change compilation, and professional certification well before 29 November or 30 May. Companies that treat the sixty-day window as generous often discover that obtaining depository data, resolving a mismatch, and arranging certification can easily consume three to four weeks, leaving little room for error if the work starts late.

PAS-6 Due Dates for 2026

For the current year, the half year ended 31 March 2026 carries a PAS-6 due date of 30 May 2026, and the half year ending 30 September 2026 carries a due date of 29 November 2026. Each filing is made for every ISIN the company holds. The MCA occasionally relaxes additional fees through circulars in specific situations, so where a filing slips, check whether any relaxation is in force on the official portal rather than assuming the standard additional fee applies. Treat the two dates as firm and plan certification at least a week ahead.

A company with more than one type of security, for example equity and preference shares, sometimes files a single PAS-6. The form requires the reconciliation to be furnished for each ISIN separately. Filing one combined form leaves a security unreported and the reconciliation incomplete. Identify every active ISIN before you start and prepare a distinct filing for each, all covering the same half-year end.

Who Certifies PAS-6 and What Certification Means

PAS-6 cannot be filed on the company's word alone. Rule 9A(8) requires the form to be certified by a practising professional, and that certification is the backbone of the filing's credibility. The professional is not simply signing off; they independently verify the share data against the company's original records and accept personal liability for getting it right.

Certification in PAS-6 means a qualified professional in whole-time practice, either a qualified Compliance Professional in practice or a Tax Professional in practice, examines the original records of the company, confirms that the reconciliation is true, correct, and complete, and signs the form with their membership or Certificate of Practice number and Digital Signature Certificate. The verification text in the form is explicit: the professional declares they have gone through the Companies Act, 2013 and the Depositories Act, 1996, verified the particulars from original records, and understand they are liable under Section 448 for wrong certification. This is a real accountability mechanism, not a formality.

The division of work is straightforward. The company assembles the records, the CIN and ISIN data, the Benpos statements, the capital-change details, and the authorised signatory's Digital Signature Certificate. The practising professional then verifies that data against the originals, certifies the form, and signs with their own DSC. Two signatures appear on a complete PAS-6: the company's authorised signatory, who confirms board authority to file, and the certifying professional, who vouches for the accuracy of the reconciliation. A company cannot self-certify its way around this requirement.

From the certifications we coordinate, the cleanest filings give the professional the Benpos statements, the Register of Members extract, and a one-page schedule of capital changes upfront, rather than feeding documents piecemeal. The professional's job is to verify, not to assemble, so a complete data pack turns certification into a same-day task. Where companies hand over fragments and expect the professional to reconstruct the half year, the certification stalls and the deadline pressure builds. Treat the professional as an auditor of your pack, not a preparer of it.

Step-by-Step: How to File Form PAS-6 on MCA V3

The full process runs across eight steps, from confirming applicability to tracking the SRN after submission. Most companies complete it in 5 to 7 working days once an ISIN is in place. The steps below assume a company that has already dematerialised its shares; if you have not, the demat process is a prerequisite covered separately.

Before you begin, confirm that the company login works on the MCA V3 portal, that the authorised signatory's Digital Signature Certificate is registered and valid, and that you have identified every ISIN the company holds. Keep the audited capital figures, the Register of Members, and the depository statements within reach, because the reconciliation draws on all three. Working through the steps in order prevents the common problem of reaching the certification stage with an unexplained gap that sends you back to the data.

Step 1: Confirm PAS-6 Applies to Your Company

Start by checking whether your company is covered. Every unlisted public company falls under Rule 9A, and every private company that is not a small company falls under Rule 9B of the Companies (Prospectus and Allotment of Securities) Rules, 2014. Confirm you are not in an exempt category: a Nidhi company, a government company, a small company, or a wholly owned subsidiary of an unlisted public company. Getting this wrong in either direction is costly, since filing when exempt wastes effort and not filing when covered triggers penalties. Re-check small-company status each year against the capital and turnover thresholds.

Step 2: Obtain ISIN and Set Up Demat Connectivity

If you have not already, appoint a Registrar and Transfer Agent and obtain an ISIN for each type of security from NSDL or CDSL. PAS-6 is prepared for each ISIN separately, so the form cannot be filed without one. This step links your company's share data to the depository system on which the entire reconciliation depends. Companies completing dematerialisation for the first time should follow our guide on how to dematerialise private company shares, which covers the ISIN application and the RTA appointment that precede the first PAS-6.

Step 3: Collect Capital and Depository Data for the Half Year

Gather the issued capital from your audited books and the Register of Members, then obtain the beneficial position (Benpos) statements from NSDL and CDSL as on the half-year end date of 30 September or 31 March. Record the number of shares held in dematerialised form in each depository and the number still held in physical form. Request the Benpos statements as soon as the half year closes, because depository data pulled weeks later can drift from the position on the cut-off date and create reconciliation noise that is hard to unwind.

Step 4: Reconcile Issued Capital With Held Capital

Compare the issued capital against the total of shares held in demat form in CDSL and NSDL plus shares in physical form. The two should match. Where they do not, identify the exact reason, such as a demat request still in process, shares allotted but not yet credited, or a Register of Members not updated for a recent allotment. Record the reason precisely in the form. Under Rule 9A(8A), the company must also immediately bring any difference to the notice of the depositories, so resolution and disclosure go hand in hand.

The most damaging shortcut is recording a vague reason like "under reconciliation" for a difference between issued and held capital. The Registrar and any future acquirer read this field closely. State the specific cause, the number of shares involved, and the corrective step taken, for example "1,200 shares allotted on 18 March, demat credit confirmed on 4 April, Register updated." A precise reason turns a flagged gap into evidence of control.

Step 5: Compile Changes in Share Capital and Shareholding

List every change in share capital during the half year: rights issues, bonus shares, private placement, ESOP allotments, conversions, amalgamation, buyback, capital reduction, and forfeiture. For each, note whether the change was intimated to NSDL and to CDSL, since the depository records must mirror the corporate action. Then record the shareholding of promoters, directors, and Key Managerial Personnel, split between demat and physical form. This confirms the Rule 9A mandate that the entire holding of insiders be dematerialised before the company issues securities or makes a buyback, bonus, or rights offer.

Step 6: Get the Form Certified by a Practising Professional

Engage a practising professional, a qualified Compliance Professional in practice or a Tax Professional in practice, to verify the reconciliation against your original records and certify the form. The professional checks the capital table, the changes, and the shareholding data, then signs with their membership or COP number and Digital Signature Certificate. The certification carries Section 448 liability for wrong statements, so the professional will expect a complete, accurate data pack. Build certification into your timeline at least a week before the due date to absorb any queries the professional raises.

Step 7: File PAS-6 on MCA V3 and Pay the Fee

Log in to the MCA V3 portal at mca.gov.in, open the web-based Form PAS-6, and enter the reconciliation details for each ISIN. Attach any supporting documents, affix the Digital Signature Certificate of the authorised signatory, and run the pre-scrutiny check to catch errors before submission. Pay the filing fee prescribed under the Companies (Registration Offices and Fees) Rules, 2014 through the MCA payment gateway. A Service Request Number (SRN) is generated on successful submission, which is your proof and tracking reference for the filing.

Step 8: Track the SRN and Retain Records

Track the SRN status on the MCA V3 portal until the form is taken on record. File within sixty days of the half-year end, by 30 May or 29 November, to avoid the additional fee. Download and retain the filed form, the payment challan, and the professional's certification in your statutory records, because these are the documents an acquirer or the Registrar will ask for later. A clean, complete PAS-6 archive is part of well-run event-based ROC compliance and saves significant time during due diligence.

A Worked Example: PAS-6 for a Private Non-Small Company

A concrete example shows how the reconciliation comes together. Consider a private limited company that crossed the small-company thresholds in the previous year, dematerialised its equity shares under Rule 9B, and is preparing its PAS-6 for the half year ended 31 March 2026, due by 30 May 2026. The company has a single ISIN for its equity shares and a straightforward shareholding.

The Capital Position on 31 March 2026

The company's issued capital is 5,00,000 equity shares. The Benpos statements show 3,40,000 shares held in demat form in NSDL and 1,40,000 shares in CDSL, a total of 4,80,000 dematerialised shares. A further 20,000 shares remain in physical form, held by two early shareholders who have not yet lodged demat requests. The total held capital is therefore 5,00,000 shares, which matches the issued capital exactly. There is no difference to explain, so the reasons field records "Nil, issued capital fully reconciled," and the physical 20,000 shares are noted as pending dematerialisation by the holders.

The Changes and the Filing

During the half year, the company made one private placement of 50,000 shares, intimated to both NSDL and CDSL, and granted 10,000 ESOP shares that were credited in demat form. Promoters and directors hold their entire stake of 3,00,000 shares in demat form, satisfying the insider demat mandate, while the only physical holding sits with the two outside shareholders. The practising professional verifies the Benpos statements, the Register of Members, and the placement and ESOP records, then certifies the form. The company files PAS-6 for its single ISIN on the MCA V3 portal on 12 May 2026, well inside the 30 May deadline, pays the prescribed fee, and retains the SRN.

Two lessons stand out. First, a matched reconciliation is the goal, but a difference is not fatal if it is explained precisely; here the 20,000 physical shares are disclosed and attributed rather than hidden. Second, the timing discipline pays off: by pulling Benpos data in early April and certifying in early May, the company filed three weeks early, leaving room for any query. Repeated each half year, this routine keeps the cap table clean and the filing uneventful.

What Happens After You File PAS-6?

Filing is not quite the end of the process. PAS-6 is taken on record by the Registrar on the basis of the company's statement of correctness and the professional's certification, so the value of the filing depends on what you do with the acknowledgment and how you carry the position forward into the next cycle.

Once you submit the form and pay the fee, the MCA V3 portal generates a Service Request Number and the form is taken on file. Unlike certain approvals, PAS-6 does not produce a separate approval certificate; the filed form, the challan, and the SRN together constitute your record of compliance. Download all three immediately and store them with the half-year's reconciliation working, the Benpos statements, and the professional's certification. This bundle is exactly what an acquirer's advisers, a lender, or the Registrar will request, and reconstructing it later from the portal is slower than retaining it at the time.

The filing also sets the baseline for the following half year. The closing issued capital, demat holdings, and physical holdings you reported become the opening position you reconcile against six months later, so any difference you flagged this period must be tracked to resolution before the next filing. A difference disclosed as "demat request pending" in one PAS-6 should appear as resolved in the next; if it persists, the recurring entry signals an unaddressed problem. Treating each PAS-6 as a continuation of the last, rather than an isolated form, is what turns the filing into a genuine control over your cap table instead of a twice-yearly formality.

Keep the filed PAS-6, the payment challan, the SRN, the NSDL and CDSL Benpos statements, the reconciliation working, and the professional's certification together for each half year. These documents support the on-record filing, evidence the reconciliation, and are the first items requested during due diligence for a funding round, share transfer, or acquisition.

PAS-6 Fees and Penalties for Non-Filing

The cost of filing PAS-6 on time is modest; the cost of missing it is not. The normal fee is small and based on the company's nominal share capital, while late filing and non-filing trigger an escalating additional fee and, eventually, a statutory penalty. Understanding both halves keeps the filing economical.

The Normal Filing Fee

The PAS-6 filing fee follows the Companies (Registration Offices and Fees) Rules, 2014 and is computed on the company's nominal share capital. For companies with share capital, the fee ranges from ₹200 for the smallest capital band up to ₹600 for the largest, charged per filing and therefore per ISIN. A company without share capital pays a flat ₹200. Because the fee is calculated at the point of filing on the MCA V3 portal, confirm the exact amount for your capital band on the portal rather than relying on a fixed figure, as the fee schedule is updated from time to time.

ComponentAmount (₹)Notes
Normal MCA filing fee200 to 600Based on nominal share capital, per ISIN, under the Fees Rules, 2014
Companies without share capital200Flat fee per filing
Additional fee for late filing₹100 per dayUnder Section 403, from due date to actual filing date
Professional certification chargeVaries by scopeCharged by the practising professional, separate from MCA fee
Penalty for non-filing (Section 450)Up to ₹10,000 plus ₹1,000 per dayCapped at ₹2,00,000 (company) and ₹50,000 (officer)

Late Fee and Penalty Exposure

A delayed PAS-6 first attracts an additional fee, charged at ₹100 per day from the due date until the form is filed, under Section 403 of the Companies Act, 2013. There is no automatic upper limit on this per-day additional fee, so a long delay can multiply the cost well beyond the modest normal fee. Where the company simply does not file, the position is more serious. Rule 9A prescribes no specific penalty, so the default falls under the general penalty in Section 450 of the Companies Act, 2013.

Under Section 450, where no specific penalty is provided, the company and every officer in default are liable to a penalty of up to ₹10,000, and for a continuing default, a further ₹1,000 for each day the default continues, subject to a maximum of ₹2,00,000 for the company and ₹50,000 for an officer in default. Separately, a professional who certifies the form wrongly is liable under Section 448 for false statements. The economics are clear: the normal fee is a few hundred rupees, while a missed filing can compound into lakhs, so timely filing is by far the cheapest path.

Across the compliance calendars we manage, PAS-6 is one of the easiest filings to forget precisely because it is half-yearly rather than annual. The companies that never miss it set two recurring reminders, in early October and early April, and treat PAS-6 as part of the same close as their quarterly books. The few hundred rupees of normal fee is trivial next to the ₹1,000-per-day additional fee a forgotten filing accrues, so the discipline of a calendar entry is the highest-return compliance habit a non-small company can build.

How PAS-6 Connects to Dematerialisation of Private Company Shares

PAS-6 does not exist in isolation. It is the recurring reporting layer that sits on top of a one-time event: the dematerialisation of a company's shares. Understanding this link explains why so many private companies suddenly face PAS-6 from 2023 onward.

The sequence is logical. Rule 9B made dematerialisation mandatory for private non-small companies, which means each such company must appoint a Registrar and Transfer Agent, obtain an ISIN, and convert its physical share certificates into electronic form held in NSDL or CDSL. That conversion is a project with a defined endpoint. PAS-6 is what begins once that endpoint is reached: every six months thereafter, the company must prove that its issued capital and its dematerialised holdings still agree. In other words, dematerialisation is the entry ticket, and PAS-6 is the ongoing season pass that confirms the share register stays clean.

This is why the two obligations are best planned together. A company approaching the small-company thresholds should map both the demat project and the first PAS-6 due date in the same compliance plan, because the demat completion date determines which half year produces the first reconciliation. Treating share dematerialisation as a finished task while ignoring the PAS-6 that follows is a common gap. The half-yearly filing is the proof that the dematerialised position is being maintained, not just achieved once.

The Insider Demat Condition

One feature of Rule 9A connects dematerialisation, PAS-6, and corporate actions directly. Before an unlisted public company or a covered private company issues any securities, buys back shares, or makes a bonus or rights offer, the entire holding of its directors, promoters, and Key Managerial Personnel must be in dematerialised form. PAS-6 captures the promoter, director, and KMP holding split between demat and physical form, so the half-yearly reconciliation is also the periodic check that this condition is satisfied. A company planning a fundraise or buyback should confirm insider demat status well ahead, because a physical insider holding can block the corporate action and will show up in the very next PAS-6.

PAS-6 Compared With Related Share Capital Filings

Owners often confuse PAS-6 with other share-related filings, because multiple forms touch share capital but serve different purposes. PAS-6 is purely a reconciliation; it does not record an allotment, register a charge, or report annual particulars. Knowing where it sits relative to neighbouring filings prevents both duplication and gaps in your compliance calendar.

FilingPurposeFrequencyTrigger
PAS-6Reconcile issued capital with demat and physical holdingsHalf-yearlyMandatory demat under Rule 9A or 9B
PAS-3Return of allotment of sharesEvent-basedEach allotment of securities
MGT-7 or MGT-7AAnnual return with shareholding particularsAnnualEnd of every financial year
SEBI quarterly reconciliationReconcile share capital for listed sharesQuarterlyListing on a stock exchange

The relationship is sequential rather than overlapping. When a company allots shares, it files PAS-3 to record the allotment, the new shares are dematerialised and credited to the depository, and the next PAS-6 then reconciles the updated issued capital against the depository holdings. The annual return captures shareholding once a year for a different statutory purpose. The SEBI quarterly reconciliation is the listed-company cousin of PAS-6, more frequent and filed with exchanges rather than the Registrar. A non-small private company therefore runs PAS-6 twice a year, PAS-3 as and when it allots, and the annual return once, each feeding a different part of the same picture of its capital.

A pattern we see in due diligence is a company that files PAS-3 diligently for every allotment but forgets that the same allotment must surface in the next PAS-6. An acquirer's advisers cross-check the two: the shares recorded as allotted in PAS-3 should appear in the issued capital and the changes table of the following PAS-6. A mismatch between the two filings is one of the fastest ways to raise a diligence query, so reconcile your PAS-3 allotments into each half-yearly PAS-6 before you file.

Maintaining Demat Compliance Between PAS-6 Filings

PAS-6 is a snapshot taken twice a year, but the obligations it reports are continuous. The companies that file clean reconciliations are the ones that maintain the underlying demat position between filings, rather than scrambling to assemble it twice a year. A few ongoing habits keep the half-yearly form straightforward.

The first is keeping the Register of Members current. Every allotment, transfer, or transmission should be entered promptly, so the register always agrees with the depository position. When the register lags, the gap surfaces as an unexplained difference in PAS-6, and reconstructing the cause months later is far harder than recording it at the time. The second habit is routing every corporate action, rights, bonus, ESOP, buyback, or capital reduction, through the depository intimation process immediately, so both NSDL and CDSL reflect the change. PAS-6 asks whether each change was intimated to both depositories, and a "no" is precisely the kind of answer that invites scrutiny.

The third habit concerns demat requests. When a shareholder lodges shares for dematerialisation, the request should be tracked until the depository confirms it, ideally within the 21-day window the form references. A backlog of requests pending beyond 21 days not only populates an awkward field in PAS-6 but also signals a breakdown between the company, its Registrar and Transfer Agent, and the depository. Reviewing the pending-request list monthly, rather than at filing time, keeps the number low and the reasons fresh. Companies that treat these three habits as routine find that PAS-6 becomes a confirmation of a position they already control, not an investigation into one they have lost track of.

Common Issues and How to Resolve Them

A handful of issues account for most PAS-6 problems. Each has a clear fix once the underlying cause is understood, and most trace back to data timing or a misread of applicability.

Issued Capital Does Not Match Held Capital

This is the most common reconciliation problem. The usual causes are a demat request still in process on the cut-off date, shares allotted but not yet credited to the depository, or a Register of Members that has not been updated for a recent allotment. Resolve it by tracing each share movement around the half-year end, recording the specific reason and the number of shares involved in the form, and notifying the depositories of the difference as Rule 9A(8A) requires. A precise explanation is far stronger than a vague "under reconciliation" note.

No ISIN Obtained Yet

A company that has not obtained an ISIN cannot file PAS-6, because the form is prepared per ISIN. If you reach the due date without an ISIN, the real problem is incomplete dematerialisation, not the filing itself. Prioritise appointing a Registrar and Transfer Agent and obtaining the ISIN from NSDL or CDSL, then file PAS-6 for the relevant half year. The absence of an ISIN itself signals non-compliance with Rule 9A or Rule 9B that the Registrar can act on.

Uncertainty About Small-Company Status

Borderline companies often cannot tell whether they are still small and therefore exempt. Resolve it by testing both the paid-up capital threshold of ₹4 crore and the turnover threshold of ₹40 crore against your latest audited figures. Crossing either limit ends small-company status and brings Rule 9B and PAS-6 into play from that point. When in doubt, the safer course is to treat the company as covered, since the cost of an unnecessary filing is trivial next to the penalty for a missed one.

Multiple ISINs Filed as One

Companies with both equity and preference shares sometimes file a single combined PAS-6. The fix is to identify every active ISIN before filing and prepare a separate reconciliation for each, all covering the same half-year end. Each filing carries its own fee and its own SRN. Confirm the full list of ISINs with your Registrar and Transfer Agent, since a security dematerialised mid-period may have a recently issued ISIN that is easy to overlook.

Common Mistakes to Avoid

Beyond technical reconciliation issues, four habits quietly create PAS-6 risk. Avoiding them keeps the half-yearly filing routine and defensible.

1. Treating PAS-6 as a Public-Company-Only Form

Since Rule 9B, every private non-small company must file PAS-6. Assuming the form is only for public companies is the single biggest source of missed filings. Re-check your small-company status each year and act the moment you cross a threshold.

2. Pulling Depository Data Late

Benpos statements requested weeks after the half-year end can drift from the cut-off position and create phantom mismatches. Request the NSDL and CDSL statements as on 31 March or 30 September in the first week after the half year closes.

3. Recording Vague Reasons for Differences

A reason like "under reconciliation" invites scrutiny. State the specific cause, the number of shares, and the corrective step, so a flagged difference reads as evidence of control rather than a lapse.

4. Leaving Certification to the Last Day

The certifying professional verifies the data and may raise queries. Hand over a complete data pack and arrange certification at least a week before 30 May or 29 November, so a single question does not push the filing past the deadline.

Related Resources

  • ROC Annual Filing: the annual returns and financial statements that run alongside the half-yearly PAS-6.
  • Issue of Shares: assistance with new share issues that must reflect in your next reconciliation.

Summary

Form PAS-6 is the half-yearly Reconciliation of Share Capital Audit Report that every unlisted public company under Rule 9A and every private non-small company under Rule 9B must file with the Registrar of Companies on the MCA V3 portal. Prepare the form for each ISIN, reconcile issued capital with shares held in NSDL, CDSL, and physical form, explain any difference precisely, and have the form certified by a practising professional. File within sixty days of each half year, by 30 May for the October to March period and 29 November for the April to September period, to avoid the additional fee and the Section 450 penalty. Done consistently each half year, PAS-6 keeps your cap table clean and your dematerialisation compliance current.

Get Assistance With PAS-6 and Share Capital Reconciliation

ProTax provides assistance for PAS-6 preparation, dematerialisation, and half-yearly reconciliation filing with the MCA, coordinating the depository data and professional certification so your share capital records stay accurate and on time.

Get Expert Assistance

Frequently Asked Questions

What is Form PAS-6?

Form PAS-6 is the half-yearly Reconciliation of Share Capital Audit Report that an unlisted public company or a private non-small company files with the Registrar of Companies. It reconciles issued capital with shares held in dematerialised and physical form under Rule 9A of the Companies (Prospectus and Allotment of Securities) Rules, 2014.

Who has to file Form PAS-6?

Every unlisted public company must file PAS-6 under Rule 9A, and every private company that is not a small company must file it under Rule 9B after mandatory dematerialisation. The duty applies once the company has an active ISIN. Listed companies are outside PAS-6, since they report to stock exchanges under separate depository regulations instead.

Is PAS-6 applicable to private limited companies?

Yes, for private companies that are not small companies. Rule 9B, inserted by the Companies (Prospectus and Allotment of Securities) Second Amendment Rules, 2023, extended dematerialisation to private companies and, through Rule 9B(5), applied PAS-6 to them. Small private companies, government companies, and wholly owned subsidiaries of unlisted public companies remain exempt from the requirement.

What is the due date for filing PAS-6?

PAS-6 must be filed within sixty days from the end of each half year. The due date is 30 May for the October to March half year and 29 November for the April to September half year. The form is prepared for the half years ending 31 March and 30 September, separately for each ISIN held by the company.

What is the PAS-6 due date for 2026?

For the half year ended 31 March 2026, the PAS-6 due date is 30 May 2026. For the half year ending 30 September 2026, the due date is 29 November 2026. Each filing is made within sixty days from the half-year end. Confirm the current cycle on mca.gov.in before filing.

Who can certify Form PAS-6?

Form PAS-6 must be certified by a practising professional, either a qualified Compliance Professional in practice or a Tax Professional in practice. The professional verifies the share data against the company's original records, affixes their Digital Signature Certificate, and quotes their membership or Certificate of Practice number, accepting liability under Section 448 for wrong certification.

What does PAS-6 reconcile?

PAS-6 reconciles the company's issued capital with the total of shares held in dematerialised form in NSDL and CDSL plus shares still in physical form. Any difference between issued capital and held capital must be explained with reasons, such as pending demat requests or an unupdated Register of Members.

What is ISIN and why is it needed for PAS-6?

An International Securities Identification Number (ISIN) is a 12-character code that uniquely identifies a security in the depository system. PAS-6 is prepared for each ISIN separately, so a company cannot file the form without obtaining an ISIN from NSDL or CDSL through its Registrar and Transfer Agent first.

How is PAS-6 filed on the MCA portal?

PAS-6 is filed as a web-based form on the MCA V3 portal at mca.gov.in. You log in with the company credentials, enter the reconciliation details for each ISIN, attach supporting documents, affix the Digital Signature Certificate, run pre-scrutiny, and pay the fee. A Service Request Number (SRN) is generated on submission for tracking.

What information goes into Form PAS-6?

The form captures the CIN, ISIN, and capital details: issued capital, shares in demat form in NSDL and CDSL, shares in physical form, and reasons for any difference. It also records changes in capital during the half year, shareholding of promoters, directors, and KMP, Register of Members status, and demat requests pending beyond 21 days.

What is the fee for filing PAS-6?

The PAS-6 fee follows the Companies (Registration Offices and Fees) Rules, 2014 and is based on the company's nominal share capital, ranging from ₹200 to ₹600 per filing. Companies without share capital pay a flat ₹200. Confirm the current fee on the MCA V3 portal, since the amount is computed at filing.

Is there a separate PAS-6 form for each ISIN?

Yes. The form states that all information must be furnished for each ISIN separately. A company with more than one type of security, such as equity shares and preference shares, files a distinct reconciliation for each ISIN. Each filing covers the same half year ending 31 March or 30 September.

What are the PAS-6 late fees for delayed filing?

A delayed PAS-6 attracts an additional fee on top of the normal fee, charged on a per-day basis under Section 403 of the Companies Act, 2013. The portal computes the additional fee from the due date to the actual filing date. Beyond the fee, prolonged non-filing exposes the company to penalty under Section 450.

What is the penalty for not filing PAS-6?

Rule 9A prescribes no specific penalty, so non-filing falls under the general penalty in Section 450 of the Companies Act, 2013. That is up to ₹10,000 on the company and every officer in default, with a further ₹1,000 per day for a continuing default, capped at ₹2,00,000 for a company and ₹50,000 for an officer.

Can PAS-6 be filed without an ISIN?

No. ISIN is a mandatory field in PAS-6, and the form is prepared for each ISIN. A company that has not obtained an ISIN cannot file the form, which itself signals non-compliance with the dematerialisation requirement under Rule 9A or Rule 9B. Obtain the ISIN through a depository before attempting to file.

Which companies are exempt from PAS-6?

Among unlisted public companies, Nidhi companies, government companies, and wholly owned subsidiaries are exempt. Among private companies, small companies, government companies, and wholly owned subsidiaries of unlisted public companies are exempt. All other unlisted public and private non-small companies with share capital must file PAS-6 each half year.

What is a small company for PAS-6 exemption?

A small company under the Companies Act, 2013 is a private company with paid-up capital up to ₹4 crore and turnover up to ₹40 crore, within limits the Central Government notifies. Small companies are exempt from PAS-6. A private company that crosses these thresholds loses small-company status and must then comply with Rule 9B and file PAS-6.

How does PAS-6 relate to dematerialisation of private company shares?

PAS-6 is the ongoing reporting layer on top of dematerialisation. Once a private non-small company dematerialises its shares under Rule 9B, it must file PAS-6 every half year. Our guide on how to dematerialise private company shares covers the one-time demat process that triggers this recurring filing.

What is the difference between Rule 9A and Rule 9B?

Rule 9A mandates dematerialisation and PAS-6 filing for unlisted public companies from 2018. Rule 9B, added in 2023, extended the same framework to private companies that are not small companies. Rule 9B(5) applies sub-rules (4) to (10) of Rule 9A, so the PAS-6 obligation flows through to private companies in the same form.

Do I report shares held by directors and promoters in PAS-6?

Yes. PAS-6 has a dedicated table for shares held by promoters, directors, and Key Managerial Personnel, split between demat and physical form. This matters because Rule 9A requires the entire holding of directors, promoters, and KMP to be dematerialised before the company issues securities, buys back shares, or makes a bonus or rights offer.

What is a demat request pending beyond 21 days?

When a shareholder lodges shares for dematerialisation, the depository should confirm the request within 21 days. PAS-6 asks for the number of demat requests confirmed after 21 days and those pending beyond 21 days, with reasons for the delay. This flags bottlenecks between the company, its RTA, and the depository.

What happens if issued capital does not match held capital?

Any difference between issued capital and the total held in demat and physical form must be explained in the form with specific reasons. Under Rule 9A(8A), the company must also immediately bring the difference to the notice of the depositories. Common causes are a pending demat request or a Register of Members not yet updated for a recent allotment.

Can a company file PAS-6 itself or does it need a professional?

The company prepares and submits the form, but it cannot be filed without certification by a practising professional. The professional independently verifies the share data and signs the form, so the filing is a joint effort: the company supplies records and the authorised signatory's DSC, and the qualified professional certifies and signs with their own DSC.

How long does it take to prepare and file PAS-6?

Most companies complete PAS-6 in 5 to 7 working days once the ISIN is in place. The time goes into obtaining Benpos statements from NSDL and CDSL, reconciling them against the books, listing capital changes, and getting the professional certification. Companies with clean records and a single ISIN finish faster.

What documents do I need for PAS-6?

You need the CIN, ISIN, issued and paid-up capital figures, Benpos statements from NSDL and CDSL, the Register of Members, and details of capital changes during the half year. You also need shareholding data for promoters, directors, and KMP, and the certifying professional's membership number and Digital Signature Certificate.

Does PAS-6 apply to a company with only preference shares?

Yes, if the company is otherwise covered and the preference shares are dematerialised. PAS-6 is filed per ISIN, so a company with both equity and preference shares files a separate reconciliation for each. The capital details, changes, and reconciliation are reported individually for every type of security held in demat form.

What is the link between PAS-6 and ROC annual filing?

PAS-6 is a standalone half-yearly filing that is separate from the annual return and financial statements, but both are part of the same compliance calendar. A non-small private company tracks PAS-6 twice a year alongside its annual filings. Our ROC annual filing service covers the yearly forms that sit beside PAS-6.

Can the PAS-6 due date be extended?

The MCA occasionally issues general relaxations on additional fees through circulars, but there is no routine extension of the sixty-day deadline. Treat 30 May and 29 November as firm dates. Always confirm whether any relaxation circular is in force for the current cycle on mca.gov.in rather than assuming an extension.

Is PAS-6 the same as the SEBI reconciliation for listed companies?

They are parallel but distinct. Listed companies submit a quarterly Reconciliation of Share Capital Audit Report to the stock exchanges under SEBI depository regulations. PAS-6 is the MCA equivalent for unlisted public and private non-small companies, filed half-yearly with the Registrar of Companies rather than with an exchange.

What is Section 448 liability in PAS-6 certification?

Section 448 of the Companies Act, 2013 punishes false statements in any return or certificate. The PAS-6 verification text states that the certifying professional accepts liability under Section 448 for wrong certification. This makes the professional personally accountable for verifying that the share data is true, correct, and complete before signing.

Frequently Asked Questions

What is Form PAS-6?

Form PAS-6 is the half-yearly Reconciliation of Share Capital Audit Report that an unlisted public company or a private non-small company files with the Registrar of Companies. It reconciles issued capital with shares held in dematerialised and physical form under Rule 9A of the Companies (Prospectus and Allotment of Securities) Rules, 2014.

Who has to file Form PAS-6?

Every unlisted public company must file PAS-6 under Rule 9A, and every private company that is not a small company must file it under Rule 9B after mandatory dematerialisation. The duty applies once the company has an active ISIN. Listed companies are outside PAS-6, since they report to stock exchanges under separate depository regulations instead.

Is PAS-6 applicable to private limited companies?

Yes, for private companies that are not small companies. Rule 9B, inserted by the Companies (Prospectus and Allotment of Securities) Second Amendment Rules, 2023, extended dematerialisation to private companies and, through Rule 9B(5), applied PAS-6 to them. Small private companies, government companies, and wholly owned subsidiaries of unlisted public companies remain exempt from the requirement.

What is the due date for filing PAS-6?

PAS-6 must be filed within sixty days from the end of each half year. The due date is 30 May for the October to March half year and 29 November for the April to September half year. The form is prepared for the half years ending 31 March and 30 September, separately for each ISIN held by the company.

What is the PAS-6 due date for 2026?

For the half year ended 31 March 2026, the PAS-6 due date is 30 May 2026. For the half year ending 30 September 2026, the due date is 29 November 2026. Each filing is made within sixty days from the half-year end. Confirm the current cycle on mca.gov.in before filing.

Who can certify Form PAS-6?

Form PAS-6 must be certified by a practising professional, either a qualified Compliance Professional in practice or a Tax Professional in practice. The professional verifies the share data against the company's original records, affixes their Digital Signature Certificate, and quotes their membership or Certificate of Practice number, accepting liability under Section 448 for wrong certification.

What does PAS-6 reconcile?

PAS-6 reconciles the company's issued capital with the total of shares held in dematerialised form in NSDL and CDSL plus shares still in physical form. Any difference between issued capital and held capital must be explained with reasons, such as pending demat requests or an unupdated Register of Members.

What is ISIN and why is it needed for PAS-6?

An International Securities Identification Number (ISIN) is a 12-character code that uniquely identifies a security in the depository system. PAS-6 is prepared for each ISIN separately, so a company cannot file the form without obtaining an ISIN from NSDL or CDSL through its Registrar and Transfer Agent first.

How is PAS-6 filed on the MCA portal?

PAS-6 is filed as a web-based form on the MCA V3 portal at mca.gov.in. You log in with the company credentials, enter the reconciliation details for each ISIN, attach supporting documents, affix the Digital Signature Certificate, run pre-scrutiny, and pay the fee. A Service Request Number (SRN) is generated on submission for tracking.

What information goes into Form PAS-6?

The form captures the CIN, ISIN, and capital details: issued capital, shares in demat form in NSDL and CDSL, shares in physical form, and reasons for any difference. It also records changes in capital during the half year, shareholding of promoters, directors, and KMP, Register of Members status, and demat requests pending beyond 21 days.

What is the fee for filing PAS-6?

The PAS-6 fee follows the Companies (Registration Offices and Fees) Rules, 2014 and is based on the company's nominal share capital, ranging from ₹200 to ₹600 per filing. Companies without share capital pay a flat ₹200. Confirm the current fee on the MCA V3 portal, since the amount is computed at filing.

Is there a separate PAS-6 form for each ISIN?

Yes. The form states that all information must be furnished for each ISIN separately. A company with more than one type of security, such as equity shares and preference shares, files a distinct reconciliation for each ISIN. Each filing covers the same half year ending 31 March or 30 September.

What are the PAS-6 late fees for delayed filing?

A delayed PAS-6 attracts an additional fee on top of the normal fee, charged on a per-day basis under Section 403 of the Companies Act, 2013. The portal computes the additional fee from the due date to the actual filing date. Beyond the fee, prolonged non-filing exposes the company to penalty under Section 450.

What is the penalty for not filing PAS-6?

Rule 9A prescribes no specific penalty, so non-filing falls under the general penalty in Section 450 of the Companies Act, 2013. That is up to ₹10,000 on the company and every officer in default, with a further ₹1,000 per day for a continuing default, capped at ₹2,00,000 for a company and ₹50,000 for an officer.

Can PAS-6 be filed without an ISIN?

No. ISIN is a mandatory field in PAS-6, and the form is prepared for each ISIN. A company that has not obtained an ISIN cannot file the form, which itself signals non-compliance with the dematerialisation requirement under Rule 9A or Rule 9B. Obtain the ISIN through a depository before attempting to file.

Which companies are exempt from PAS-6?

Among unlisted public companies, Nidhi companies, government companies, and wholly owned subsidiaries are exempt. Among private companies, small companies, government companies, and wholly owned subsidiaries of unlisted public companies are exempt. All other unlisted public and private non-small companies with share capital must file PAS-6 each half year.

What is a small company for PAS-6 exemption?

A small company under the Companies Act, 2013 is a private company with paid-up capital up to ₹4 crore and turnover up to ₹40 crore, within limits the Central Government notifies. Small companies are exempt from PAS-6. A private company that crosses these thresholds loses small-company status and must then comply with Rule 9B and file PAS-6.

How does PAS-6 relate to dematerialisation of private company shares?

PAS-6 is the ongoing reporting layer on top of dematerialisation. Once a private non-small company dematerialises its shares under Rule 9B, it must file PAS-6 every half year. Our guide on how to dematerialise private company shares covers the one-time demat process that triggers this recurring filing.

What is the difference between Rule 9A and Rule 9B?

Rule 9A mandates dematerialisation and PAS-6 filing for unlisted public companies from 2018. Rule 9B, added in 2023, extended the same framework to private companies that are not small companies. Rule 9B(5) applies sub-rules (4) to (10) of Rule 9A, so the PAS-6 obligation flows through to private companies in the same form.

Do I report shares held by directors and promoters in PAS-6?

Yes. PAS-6 has a dedicated table for shares held by promoters, directors, and Key Managerial Personnel, split between demat and physical form. This matters because Rule 9A requires the entire holding of directors, promoters, and KMP to be dematerialised before the company issues securities, buys back shares, or makes a bonus or rights offer.

What is a demat request pending beyond 21 days?

When a shareholder lodges shares for dematerialisation, the depository should confirm the request within 21 days. PAS-6 asks for the number of demat requests confirmed after 21 days and those pending beyond 21 days, with reasons for the delay. This flags bottlenecks between the company, its RTA, and the depository.

What happens if issued capital does not match held capital?

Any difference between issued capital and the total held in demat and physical form must be explained in the form with specific reasons. Under Rule 9A(8A), the company must also immediately bring the difference to the notice of the depositories. Common causes are a pending demat request or a Register of Members not yet updated for a recent allotment.

Can a company file PAS-6 itself or does it need a professional?

The company prepares and submits the form, but it cannot be filed without certification by a practising professional. The professional independently verifies the share data and signs the form, so the filing is a joint effort: the company supplies records and the authorised signatory's DSC, and the qualified professional certifies and signs with their own DSC.

How long does it take to prepare and file PAS-6?

Most companies complete PAS-6 in 5 to 7 working days once the ISIN is in place. The time goes into obtaining Benpos statements from NSDL and CDSL, reconciling them against the books, listing capital changes, and getting the professional certification. Companies with clean records and a single ISIN finish faster.

What documents do I need for PAS-6?

You need the CIN, ISIN, issued and paid-up capital figures, Benpos statements from NSDL and CDSL, the Register of Members, and details of capital changes during the half year. You also need shareholding data for promoters, directors, and KMP, and the certifying professional's membership number and Digital Signature Certificate.

Does PAS-6 apply to a company with only preference shares?

Yes, if the company is otherwise covered and the preference shares are dematerialised. PAS-6 is filed per ISIN, so a company with both equity and preference shares files a separate reconciliation for each. The capital details, changes, and reconciliation are reported individually for every type of security held in demat form.

What is the link between PAS-6 and ROC annual filing?

PAS-6 is a standalone half-yearly filing that is separate from the annual return and financial statements, but both are part of the same compliance calendar. A non-small private company tracks PAS-6 twice a year alongside its annual filings. Our ROC annual filing service covers the yearly forms that sit beside PAS-6.

Can the PAS-6 due date be extended?

The MCA occasionally issues general relaxations on additional fees through circulars, but there is no routine extension of the sixty-day deadline. Treat 30 May and 29 November as firm dates. Always confirm whether any relaxation circular is in force for the current cycle on mca.gov.in rather than assuming an extension.

Is PAS-6 the same as the SEBI reconciliation for listed companies?

They are parallel but distinct. Listed companies submit a quarterly Reconciliation of Share Capital Audit Report to the stock exchanges under SEBI depository regulations. PAS-6 is the MCA equivalent for unlisted public and private non-small companies, filed half-yearly with the Registrar of Companies rather than with an exchange.

What is Section 448 liability in PAS-6 certification?

Section 448 of the Companies Act, 2013 punishes false statements in any return or certificate. The PAS-6 verification text states that the certifying professional accepts liability under Section 448 for wrong certification. This makes the professional personally accountable for verifying that the share data is true, correct, and complete before signing.

Discuss This With ProTax

FROM THE PROTAX LIBRARY

Recent Articles & Guides

Practical reading on business records, tax filings and the decisions that come with running a company.

Newsletter

Stay ahead on compliance, tax & business updates

Get selected business and compliance updates by email. Once a month, no spam.

  • 100% privacy
  • 1 email / month
  • Unsubscribe anytime
Contact ProTax
Chosen by individuals and businesses

Get Help With Your Business

Tell us what you need help with. Our team will review your enquiry and explain the next steps.

Free Consultation No Obligations Expert Advice
FREE Consultation Get Started @ ₹299 ₹0

Talk To ProTax

Share Your Business Requirement

Instant Response 100% Confidential Expert Advice
FREE Consultation Get Started @ ₹299 ₹0

Request a Free Quote

Share Your Business Requirement

Instant Response 100% Confidential Expert Advice