Skip to main content

PROTAX GUIDES

How to Maintain a Fixed Asset Register for Depreciation

Maintain a fixed asset register that meets Schedule II and CARO 2020: format and fields, tagging, book vs tax depreciation, physical verification and disposals.

How to Maintain a Fixed Asset Register for Depreciation

To maintain a fixed asset register, record every asset at acquisition with its cost, put-to-use date, location, custodian and useful life, compute book depreciation under Schedule II to the Companies Act, 2013 and tax depreciation under Section 32 of the Income-tax Act, 1961 by block, tag and physically verify assets at reasonable intervals, record disposals and impairment, and reconcile the register with the general ledger every period. For companies covered by CARO 2020, the auditor reports under clause 3(i) on whether such records exist, whether assets were verified and whether title deeds are in the company's name. This guide gives the register format, the Schedule II useful lives, a worked depreciation example, tax depreciation, GST on disposals and a verification routine.

Scope: the sections below cover fixed asset registers for companies under the Companies Act, 2013, with notes for LLPs, partnership firms and proprietorships. Detailed Ind AS measurement, revaluation and lease accounting are covered only at the level a register needs.

  • One record per asset: cost, put-to-use date, location, custodian, useful life, residual value, depreciation and tax block.
  • Schedule II: useful lives such as 15 years for general plant, 10 years for furniture and 3 years for computers; residual value ordinarily up to 5%.
  • Pro rata from put-to-use date: not from the purchase date.
  • Tax depreciation: block-wise written down value rates, half rate for assets used less than 180 days.
  • CARO clause 3(i): records, physical verification, title deeds, revaluation and benami proceedings.
  • Reconcile monthly: register totals must equal the ledger and the Schedule III note.

What Is a Fixed Asset Register?

A fixed asset register (FAR) is a detailed, item-wise record of a business's property, plant and equipment and intangible assets, showing for each asset its cost, acquisition and put-to-use dates, location, custodian, useful life, residual value, depreciation, net book value and disposal details. It is the subsidiary record behind the fixed asset figures in the balance sheet and the depreciation charge in the statement of profit and loss.

The general ledger usually holds fixed assets in a handful of accounts by class, such as plant and machinery or computers. That is enough for the balance sheet, but not for depreciation, verification or audit. Depreciation depends on each asset's own cost, date and useful life; verification needs to know where each asset is and who is responsible for it; and the auditor needs evidence that every rupee in the ledger corresponds to a real asset owned by the company. The register provides that link.

A good register also has practical value beyond compliance. It supports insurance claims, budgeting for replacements, decisions on repairs versus replacement, disposal of idle assets and accurate costing. For companies that raise loans against machinery, lenders often ask for an asset schedule drawn from the register.

Depreciation for companies follows Section 123 and Schedule II of the Companies Act, 2013, with accounting under AS 10, AS 26 and AS 28, or Ind AS 16, 38 and 36 for Ind AS companies. Auditor reporting is under clause 3(i) of the Companies (Auditor's Report) Order, 2020, and tax depreciation under Section 32 of the Income-tax Act, 1961 for FY 2025-26. The Acts and rules are available on the MCA website and Income Tax portal.

Who Needs a Fixed Asset Register and Why

Every business with fixed assets benefits from a register, and for most companies it is effectively mandatory.

EntityDriverWhat the Register Supports
Companies covered by CARO 2020Clause 3(i) reporting by the auditorProper records, verification, title deeds, revaluation and benami disclosures
All companiesSchedule II depreciation and Schedule III disclosuresDepreciation, class-wise reconciliation, capital work-in-progress ageing
Companies reporting on internal financial controlsSection 143(3)(i)Controls over additions, disposals and existence of assets
LLPs, firms and proprietorshipsAccounting standards, tax depreciation and the non-corporate formatBook and tax depreciation, class-wise reconciliation
Businesses with secured loansLender requirementsAsset schedules and insurance coverage

"The first year a company crosses into CARO coverage is when the missing register becomes visible," says Harith - Compliance Expert. "The ledger shows ₹2 crore of plant and machinery, and nobody can say which machines make up that figure or where they are. Building the register from invoices and a physical count takes weeks; keeping it from day one takes minutes per purchase."

Fixed Asset Register Format: The Fields

The format below covers what auditors, tax computations and Schedule III disclosures need. Each row is one asset or one significant component.

FieldPurpose
Asset ID or tag numberUnique link between the physical asset and the record
Description, make, model and serial numberIdentifies the asset during verification
Asset class and sub-classGroups for Schedule II life and Schedule III disclosure
Location and departmentWhere the asset is, for verification and insurance
CustodianPerson responsible for the asset
Supplier, invoice number and dateEvidence of cost and ownership
Date of purchase and date put to useDepreciation starts from the put-to-use date
Cost, with breakdown of freight, installation and taxes capitalisedBasis for depreciation
Useful life and residual valueSchedule II or a justified different estimate
Depreciation methodStraight-line or written down value
Opening accumulated depreciation, charge for the year, closing accumulated depreciationBook depreciation trail
Net book valueCarrying amount for the balance sheet
Income tax block and rateTax depreciation computation
Title document referenceFor property and vehicles
Insurance policy referenceCoverage check
Disposal date, mode, proceeds and approvalProfit or loss and tax effect on disposal
Last verification date and resultPhysical verification trail for CARO

Schedule II Useful Lives for Common Assets

Schedule II prescribes useful lives by class. Companies may use a different life if they disclose and justify it, typically on technical advice. The table lists frequently used classes.

Asset ClassUseful Life Under Schedule II
Buildings other than factory buildings, RCC frame structure60 years
Buildings other than factory buildings, non-RCC frame30 years
Factory buildings30 years
Plant and machinery, general (not continuous process)15 years
Furniture and fittings, general10 years
Electrical installations and equipment10 years
Office equipment5 years
Computers: end-user devices such as desktops and laptops3 years
Computers: servers and networks6 years
Motor cars, other than those used in a business of running them on hire8 years
Motor cycles, scooters and other mopeds10 years

Two further Schedule II principles shape the register. The residual value is ordinarily not more than 5% of original cost, and any higher figure needs disclosure and justification. And where a part of an asset is significant to its total cost and has a different useful life, it must be depreciated separately as a component, so the register needs one row per significant component.

Worked Example: Book Depreciation for a Year

Take a company with a 31 March year end that buys a machine for ₹10,00,000 plus ₹50,000 freight and installation, recoverable GST excluded, and puts it to use on 1 October 2025. It adopts the Schedule II life of 15 years, a residual value of 5% and the straight-line method.

ItemCalculationAmount (₹)
Cost capitalised₹10,00,000 + ₹50,00010,50,000
Residual value5% of ₹10,50,00052,500
Depreciable amount₹10,50,000 − ₹52,5009,97,500
Annual straight-line depreciation₹9,97,500 ÷ 1566,500
Depreciation for FY 2025-26₹66,500 × 6/12 (from 1 October)33,250
Net book value on 31 March 2026₹10,50,000 − ₹33,25010,16,750

For income tax, the same machine joins the 15% plant and machinery block. Because it was put to use for less than 180 days in FY 2025-26, tax depreciation for that year is at half the rate, 7.5% of ₹10,50,000, which is ₹78,750. The difference between book depreciation of ₹33,250 and tax depreciation of ₹78,750 is a timing difference that creates a deferred tax liability. Our depreciation calculator helps check written down value and straight-line figures for individual assets.

WDV Depreciation Formula and Schedule II Rates

Schedule II prescribes useful lives, not rates. A company that uses the written down value method therefore derives the rate from the useful life and residual value with this formula:

WDV rate = 1 − (Residual value ÷ Cost)1 ÷ Useful life

With residual value at 5% of cost, the ratio is 0.05, and the rate depends only on the useful life. The straight-line rate on cost is simply 95% divided by the useful life. The table gives the derived rates for the lives used most often.

Useful LifeTypical AssetWDV Rate (5% Residual)Straight-Line Rate on Cost
3 yearsLaptops and desktops63.16%31.67%
5 yearsOffice equipment45.07%19.00%
6 yearsServers and networks39.30%15.83%
8 yearsMotor cars31.23%11.88%
10 yearsFurniture, electrical installations25.89%9.50%
15 yearsGeneral plant and machinery18.10%6.33%
30 yearsFactory buildings9.50%3.17%
60 yearsNon-factory RCC buildings4.87%1.58%

Applying the WDV method to the machine in the earlier example, the rate for a 15-year life is 18.10%. Depreciation for FY 2025-26 is ₹10,50,000 × 18.10% × 6/12, which is ₹95,025, leaving a written down value of ₹9,54,975. In FY 2026-27, the charge is ₹9,54,975 × 18.10%, which is ₹1,72,850. The WDV method front-loads depreciation, which suits assets that lose value or usefulness quickly, such as computers and vehicles; straight-line suits assets that deliver benefits evenly, such as buildings and most machinery.

The Schedule II WDV rates above are not the income tax rates. Income tax uses its own fixed block rates, such as 15% for plant and machinery and 40% for computers, so a company using WDV in its books still keeps a separate tax schedule. Treating the two as interchangeable is one of the most frequent errors in small company accounts.

Building a Fixed Asset Register Format in Excel

Smaller businesses often start with a spreadsheet. A controlled Excel register works if it is built with discipline. Use one sheet for the asset master, with one row per asset or component and the fields listed earlier, and a second sheet for the depreciation run, with one row per asset per year.

ColumnContent or Formula
Days used in the yearDays from the later of put-to-use date and year start, to the earlier of disposal date and year end
Straight-line charge(Cost − Residual value) ÷ Useful life × Days used ÷ Days in year
WDV rate1 − (Residual value ÷ Cost) raised to (1 ÷ Useful life)
WDV chargeOpening net book value × WDV rate × Days used ÷ Days in year
Floor checkCharge limited so net book value never falls below residual value
Closing net book valueOpening net book value + Additions − Charge − Disposals
Class summaryTotals by class using a pivot or SUMIF, agreed with the ledger

Lock formula columns, keep each year's file as a separate version, and record every change in a log with date, user and reason. The floor check matters more than it seems: without it, a fully depreciated asset keeps attracting depreciation, and the net book value turns negative. Once the asset base grows past a few hundred items, or the business operates from more than two locations, moving the register into the accounting software's asset module is safer, because the software applies the same rules automatically and maintains the audit trail that the Companies (Accounts) Rules, 2014 require for accounting software.

Add a hidden check row at the bottom of the Excel register that compares the register's class totals with the trial balance figures pasted in each month. A non-zero difference highlighted in red catches missing additions or disposals within the month, instead of during the audit.

Income Tax Depreciation and the Block of Assets

Tax depreciation works differently from book depreciation. Under Section 32 of the Income-tax Act, 1961 for FY 2025-26, assets are grouped into blocks with a common rate, and depreciation is computed on the block's written down value rather than asset by asset.

BlockRate on Written Down Value
Buildings, mainly residential5%
Buildings, other than residential10%
Furniture and fittings10%
Plant and machinery, general15%
Motor cars, other than for hire15%
Computers and computer software40%
Intangible assets such as patents, trademarks and licences25%

Additions put to use for less than 180 days in the year get half the rate. Sale proceeds are deducted from the block's written down value; if they exceed it, or if the block ceases to exist, short-term capital gains arise under Section 50. From tax year 2026-27, the Income-tax Act, 2025 replaces the 1961 Act with renumbered provisions, so the register's tax fields should note which law applies to each year. Companies that opted for the concessional rate under Section 115BAA cannot claim additional depreciation, which the register should reflect.

"Keep the tax block as a field on every asset, even though tax depreciation is computed by block," advises Harith - Compliance Expert. "When an asset is sold, you need to know which block's written down value to reduce, and when a block is nearly exhausted, the asset list tells you whether a sale will trigger Section 50 capital gains. A register without tax blocks leaves the tax computation to guesswork."

Capitalisation Policy: What Goes Into the Register

A written capitalisation policy prevents the two most common errors: expensing assets that should be capitalised, and capitalising expenses that should be charged off. The policy should cover the following points.

  • Definition: tangible items held for use in production, supply, rental or administration, expected to be used for more than one period.
  • Threshold: a materiality-based minimum value below which items are expensed, applied consistently.
  • Cost elements: purchase price, import duties, non-recoverable taxes, freight, installation, testing and professional fees directly attributable to bringing the asset to use.
  • Exclusions: recoverable GST, trade discounts, general administrative overheads and costs after the asset is ready for use.
  • Spares: major spares and stand-by equipment that meet the definition are capitalised; routine spares are inventory.
  • Subsequent costs: improvements that extend life or capacity are capitalised; repairs and maintenance are expensed.
  • Components: significant parts with different useful lives recorded separately.
  • Useful lives and method: Schedule II lives by default, with documented reasons for any different estimate.

Starting depreciation from the invoice date instead of the date the asset was ready for use. A machine bought in January but installed and commissioned in May should be depreciated from May. Record both dates in the register and use the put-to-use date for depreciation, keeping the commissioning report as evidence.

Asset Tagging and Location Tracking

Tagging turns the register into something that can be verified. Assign each asset a unique number at the time of recording, print it on a durable label, barcode or RFID tag, and fix it to the asset where it will not be removed in normal use. Record the location, department and custodian in the register. When assets move, between floors, branches or employees, update the register through a simple transfer note approved by the custodian and the finance team.

Small, portable and high-risk items, such as laptops, phones, tools and testing equipment, are where tagging pays off most. Linking laptops to employees in the register also connects asset control to onboarding and exit processes, so returning a laptop becomes a checklist item when an employee leaves.

Physical Verification and CARO Clause 3(i)

CARO 2020 clause 3(i) contains five reporting items on property, plant and equipment and intangible assets. The register and the verification routine provide the evidence for each.

ClauseAuditor Reports OnEvidence
3(i)(a)(A)Proper records showing full particulars, including quantitative details and situation, of property, plant and equipmentFixed asset register with locations and quantities
3(i)(a)(B)Proper records of intangible assetsIntangibles section of the register
3(i)(b)Physical verification at reasonable intervals; material discrepancies and their treatmentVerification reports, discrepancy analysis and approvals
3(i)(c)Title deeds of immovable property held in the company's nameTitle deeds and a schedule of exceptions
3(i)(d)Revaluation of property, plant and equipment or intangibles, and whether by a registered valuer where the change is 10% or moreValuation reports
3(i)(e)Proceedings for benami propertyManagement confirmation

Running a Physical Verification

Plan the verification by location, using a register extract with tag numbers. Teams independent of the custodians scan or check each asset, note its condition, and record items found but not in the register, and items in the register but not found. Finance investigates every discrepancy: an asset may have moved, been sold without recording, been scrapped, or been lost. Discrepancies are resolved by updating the register, with approval for write-offs, and the verification report is signed and filed. Many companies verify all assets annually; others cover all assets over a three-year cycle while verifying high-value and portable items every year.

Creating a Register for an Existing Business

Many businesses discover they need a register only when an auditor or lender asks for one. Building it from scratch for an asset base that has grown over years follows a set sequence.

  • Start from the ledger: take the closing balances of each fixed asset account and the accumulated depreciation from the last audited balance sheet.
  • Collect evidence: pull purchase invoices for every capital addition in the ledger, year by year.
  • List and date: build the asset list with cost and put-to-use dates; where installation records are missing, use the best available evidence and document the basis.
  • Count and tag: physically verify every location, tag what is found, and note assets present but not listed.
  • Recompute depreciation: calculate accumulated depreciation asset by asset and compare it with the ledger total.
  • Resolve differences: write off missing assets with board approval, capitalise unrecorded assets where evidence supports it, and record any correction as the accounting standards require.
  • Lock the opening register: once the register agrees with the ledger, it becomes the base for monthly maintenance.

Where differences are material, discuss the treatment with the auditor before posting. Correcting a long-standing error may be a prior period item that needs separate disclosure, rather than a current year adjustment. Keep the reconstruction workings, invoice copies and verification sheets together in the audit file, because the auditor will test the opening register before relying on it for the CARO clause 3(i) report and the depreciation charge for the year.

Disposals, Transfers, Write-Offs and Impairment

Every asset leaves the register eventually. The treatment depends on how.

EventBook TreatmentTax TreatmentGST
SaleRemove cost and accumulated depreciation; profit or loss on saleDeduct proceeds from the block's written down value; Section 50 if the block turns negative or ceasesTax on sale; Section 18(6) where credit was taken
ScrappingRemove the asset; record scrap value; loss on write-offDeduct scrap proceeds from the blockTax on scrap sale
Loss or theftWrite off with approval; claim insuranceInsurance received is reduced from the blockReverse credit on goods lost under Section 17(5)(h) where applicable
Transfer to another location or unitUpdate location and custodianNo effect within the same entitySupply between distinct persons if the unit has a separate GSTIN
ImpairmentLoss recognised where carrying amount exceeds recoverable amountNo tax deduction until sale or write-offNone

On the GST point, Section 18(6) of the CGST Act requires a business that sells capital goods on which credit was taken to pay the higher of the credit taken reduced by 5 percentage points for every quarter or part of a quarter since the invoice date, and the tax on the transaction value. Our GST journal entries guide covers the related entries.

The ₹ amounts in this guide are illustrations. Accounting and fixed asset register maintenance are services ProTax provides directly; no government fee applies to maintaining a register. GST, stamp duty, registration charges and any statutory dues mentioned are payable to the government separately at actuals.

Visual Guide: The Fixed Asset Register Cycle

  • On Every Purchase: Record and Tag

Register entry, cost elements, put-to-use date and tag created the same day the invoice is booked.

  • Monthly: Depreciation and Ledger Reconciliation

Schedule II depreciation run; register totals agreed with the fixed asset ledgers.

  • Quarterly: Transfers, Disposals and CWIP Review

Movements approved, disposals recorded with GST and tax block effect, capital work-in-progress aged.

  • Before Year End: Physical Verification

Assets counted both ways, discrepancies investigated and approved, title documents checked.

  • Year End: Close, Impairment Review and Tax Schedule

Useful lives reviewed, impairment tested, block-wise tax schedule and Schedule III note finalised.

Step-by-Step Process to Maintain the Register

The nine steps below cover set-up and ongoing maintenance. Setting up a register for an existing business takes two to four weeks; maintaining it takes a few hours each month.

Step 1: Set a Capitalisation Policy

Draft and approve the capitalisation policy described above, covering the definition, threshold, cost elements, components, useful lives and method. Communicate it to purchase and accounts teams so invoices are coded correctly at the time of booking, and review it annually.

Step 2: Design the Register Fields

Build the register in the accounting software's asset module or a controlled spreadsheet with every field listed above. Lock formula columns, create class codes that map to Schedule II lives and tax blocks, and add a change log. Where the business has more than one GSTIN or location, include those as fields.

Step 3: Record Each Asset at Acquisition

When an invoice for a capital item is booked, create the register entry the same day with the cost elements, supplier details and the expected put-to-use date. For projects, collect costs in capital work-in-progress by project, and transfer to the register on the put-to-use date with the completion certificate. Split significant components into separate rows.

Step 4: Tag Assets and Record Locations

Generate the tag number from the register, label the asset on receipt or installation, and record the location and custodian. For assets that move often, require a transfer note for each move. For a new register, tag existing assets during the first physical count.

Step 5: Calculate Book Depreciation Under Schedule II

Run depreciation monthly or at least at each reporting date, pro rata from the put-to-use date, on cost less residual value over the useful life, using the adopted method. Review useful lives and residual values at least annually and record any change as a change in estimate applied prospectively.

Step 6: Maintain the Income Tax Depreciation Schedule

Maintain a block-wise schedule for income tax with opening written down value, additions split by put-to-use within or beyond 180 days, deductions for sale proceeds, depreciation at the block rate and closing written down value. Reconcile it with the tax audit report's depreciation clause and keep the working for the deferred tax computation.

Step 7: Record Transfers, Disposals and Impairment

Process every disposal through an approval form that captures the asset ID, reason, proceeds and buyer. Update the register, the ledger and the tax block, issue a GST invoice for sales, and compute any Section 18(6) amount. At each year end, review for impairment indicators such as damage, obsolescence or idle assets, and test where needed.

Step 8: Physically Verify Assets and Reconcile Differences

Conduct the verification as planned, record results in the register, investigate every discrepancy, and approve adjustments. File the signed verification report for the auditor's CARO review, with the treatment of each material discrepancy documented.

Recording physical verification as complete when only assets in the register were checked. A proper verification also looks for assets present at the location but missing from the register, such as items expensed wrongly or received without invoices. Both directions of the check are needed.

Step 9: Reconcile the Register With the Ledger and Close the Year

Agree the register's gross block, accumulated depreciation and net block by class with the general ledger every month or quarter, and with the Schedule III property, plant and equipment note at year end, including the ageing of capital work-in-progress. Lock the year in the register and roll it forward with opening balances for the new year. Our statutory audit preparation guide lists the related year-end documents.

Intangible Assets, Leases and Ind AS Considerations

The register should not be limited to physical items. Capitalised software, website development costs that meet recognition criteria, trademarks and patents acquired from others, and acquired goodwill belong in an intangibles section, amortised over their useful lives under AS 26 or Ind AS 38. Internally generated brands and customer lists are not recognised.

For leases, AS 19 recognises finance leases as assets; Ind AS 116 brings most leases on the balance sheet as right-of-use assets with a lease liability. Ind AS companies should hold right-of-use assets in a separate section with the lease term, payments and depreciation, and should review useful lives, residual values and methods at least annually under Ind AS 16, recording any revaluation where the revaluation model is used.

"Title is the part of the register that auditors and lenders scrutinise most closely," notes Harsh Jain - Legal Expert. "Property bought in a promoter's name, vehicles registered to a director, or land held under an agreement to sell without a registered conveyance all show up in CARO clause 3(i)(c) and the Schedule III disclosure. Record the title holder and document for each property and vehicle, and fix mismatches before the audit rather than explaining them in it."

Common Fixed Asset Register Mistakes

  • No register, only ledger balances: depreciation computed on class totals.
  • Depreciation from invoice date: instead of the put-to-use date.
  • Recoverable GST capitalised: overstating cost and depreciation.
  • Components ignored: significant parts with different lives not separated.
  • Disposals not recorded: sold or scrapped assets still depreciated.
  • No verification trail: verification done but not documented for CARO.
  • Register and ledger out of agreement: no periodic reconciliation.

Fixed Asset Register Checklist

  • ☐ Capitalisation policy approved and communicated
  • ☐ Register fields set up, including tax block and title reference
  • ☐ Every addition recorded with cost elements and put-to-use date
  • ☐ Significant components recorded separately
  • ☐ Assets tagged with location and custodian
  • ☐ Schedule II depreciation run pro rata; lives and residual values reviewed annually
  • ☐ Income tax block schedule maintained, including the 180-day rule
  • ☐ Disposals approved and recorded in books, tax block and GST
  • ☐ Physical verification done and discrepancies resolved with approval
  • ☐ Title deeds and vehicle registrations checked against the company's name
  • ☐ Register reconciled with the ledger and Schedule III note

Related Resources

Summary

A fixed asset register records each asset's cost, put-to-use date, location, custodian, useful life, residual value, book and tax depreciation, title and disposal. Depreciate under Schedule II from the put-to-use date, with residual value ordinarily up to 5% and significant components separated; compute tax depreciation by block under Section 32, with half rate for assets used less than 180 days; tag assets and verify them physically at reasonable intervals; record disposals with their GST and tax effects; and reconcile the register with the ledger every period. For CARO companies, this register and the verification trail are exactly what the auditor reports on under clause 3(i).

Get Your Fixed Asset Register Built and Maintained

ProTax, which has assisted individuals and businesses across India with registration and compliance, provides accounting services to set up fixed asset registers, compute Schedule II and income tax depreciation, run physical verification support and reconcile the register with your books ahead of the audit.

Talk to an Expert

Frequently Asked Questions

What is a fixed asset register?

A fixed asset register (FAR) is a detailed record of every item of property, plant and equipment and intangible asset a business owns, with its cost, acquisition and put-to-use dates, location, custodian, useful life, depreciation and disposal details. It supports the fixed asset figures in the financial statements and the audit.

Is a fixed asset register mandatory?

For companies covered by CARO 2020, the auditor reports under clause 3(i) whether the company maintains proper records showing full particulars, including quantitative details and situation of property, plant and equipment, and of intangible assets. In practice, every company needs a register to compute depreciation under Schedule II.

What fields should a fixed asset register contain?

Core fields are a unique asset ID or tag number, description, asset class, location, custodian, supplier, invoice number and date, put-to-use date, cost, useful life, residual value, depreciation method, opening and closing accumulated depreciation, net book value, tax block and disposal details.

What is Schedule II of the Companies Act?

Schedule II to the Companies Act, 2013 prescribes useful lives for classes of assets for computing depreciation under Section 123. Companies may adopt a different useful life or residual value if they disclose and justify it, and must apply component accounting for significant parts with different lives.

What are the Schedule II useful lives for common assets?

Examples include 60 years for non-factory RCC buildings, 30 years for factory buildings, 15 years for general plant and machinery, 10 years for furniture and fittings, 5 years for office equipment, 3 years for end-user computers, 6 years for servers and networks, and 8 years for motor cars.

What residual value applies under Schedule II?

Schedule II indicates that the residual value of an asset is ordinarily not more than 5% of its original cost. A company using a higher residual value must disclose and justify it in its financial statements. Depreciation is charged on cost less residual value over the useful life.

Should depreciation be straight-line or written down value?

Schedule II allows either method, provided it reflects how the asset's benefits are consumed and is applied consistently. Many companies use straight-line for buildings and machinery and written down value for computers and vehicles. A change in method is a change in estimate, disclosed in the accounts.

What is component accounting?

Component accounting means depreciating significant parts of an asset separately where they have different useful lives, such as an aircraft's engines and airframe, or a building's lifts and structure. Schedule II requires it where the cost of a part is significant relative to the total cost of the asset.

How is depreciation calculated for assets bought during the year?

Under Schedule II, depreciation for additions is calculated pro rata from the date the asset is available for use. A machine put to use on 1 October in a year ending 31 March gets six months of depreciation for that year, regardless of when it was purchased.

What are income tax depreciation rates for FY 2025-26?

Under the Income-tax Act, 1961 and Appendix I of the Income-tax Rules, common rates on written down value include 10% for buildings (5% for residential), 10% for furniture, 15% for general plant and machinery and motor cars, 40% for computers and 25% for intangibles. Rates apply to each block of assets.

What is the 180-day rule for tax depreciation?

If an asset is acquired and put to use for less than 180 days in the previous year, tax depreciation for that year is allowed at half the normal rate under the second proviso to Section 32(1). The balance is effectively claimed in later years through the block's written down value.

Why do book depreciation and tax depreciation differ?

Book depreciation follows Schedule II and the company's estimate of useful life; tax depreciation follows Section 32 rates on blocks of assets. The difference creates a timing difference, which gives rise to deferred tax under AS 22 or Ind AS 12. The register should track both.

What is a block of assets?

A block of assets is a group of assets in the same class with the same tax depreciation rate, such as all plant and machinery at 15%. Tax depreciation is computed on the block's written down value, adjusted for additions and sale proceeds, rather than asset by asset.

What is the capitalisation threshold?

A capitalisation threshold is the minimum cost above which an item is recorded as a fixed asset rather than expensed. The Act does not prescribe one; companies set it in their accounting policy based on materiality, apply it consistently, and disclose it. Items below the threshold are expensed when bought.

How often should fixed assets be physically verified?

CARO 2020 clause 3(i)(b) asks whether assets were physically verified by management at reasonable intervals and whether material discrepancies were dealt with. Many companies verify all assets once a year, or cover all assets over a cycle of up to three years with high-value items verified annually.

What is asset tagging?

Asset tagging is fixing a unique identifier, such as a numbered label, barcode or RFID tag, to each physical asset and recording that identifier in the register. Tags make verification faster and link each physical item to its cost, location and custodian.

How are title deeds reported under CARO?

Clause 3(i)(c) requires the auditor to report whether title deeds of immovable property disclosed in the financial statements are held in the company's name, and if not, to give details. Schedule III also requires disclosure of such properties. Keep copies of title deeds with the register.

How is the sale of a fixed asset recorded?

Remove the asset's cost and accumulated depreciation from the register and ledger, record the sale proceeds, and recognise the difference as profit or loss on sale in the statement of profit and loss. For tax, deduct the sale proceeds from the block's written down value.

Is GST payable on the sale of a used fixed asset?

Yes. Sale of capital goods is a taxable supply. Under Section 18(6) of the CGST Act, where credit was taken on the asset, the business pays the higher of the credit taken reduced by 5 percentage points per quarter since purchase, or the tax on the transaction value.

How is GST on capital goods treated in the register?

Where input tax credit is available, the asset is recorded at cost excluding GST, and the tax goes to input tax ledgers. Where credit is blocked or not claimed, GST forms part of the asset's cost. If depreciation is claimed on the GST component for income tax, credit is not available under Section 16(3).

What is impairment of fixed assets?

Impairment occurs when an asset's carrying amount exceeds its recoverable amount, which is the higher of net selling price and value in use. Under AS 28 or Ind AS 36, companies test for impairment where indicators exist, such as damage, obsolescence or falling demand, and recognise a loss.

How is capital work-in-progress tracked?

Capital work-in-progress records costs of assets under construction or installation until they are ready for use. Track each project separately with its costs and expected completion date, and transfer to the register on the put-to-use date. Schedule III requires an ageing schedule for capital work-in-progress.

How are leased assets shown in the register?

Under AS 19, assets taken on finance lease are recorded as assets with a corresponding liability and depreciated; operating lease assets are not. Under Ind AS 116, most leases create a right-of-use asset. Record right-of-use assets in a separate section of the register with lease terms.

Can a spreadsheet be used as a fixed asset register?

Yes, for smaller businesses, if it is controlled: locked formulas, versioning, reconciliation with the ledger and a change log. Companies must also meet the audit trail requirement for accounting software, so maintaining the register within the accounting system or a dedicated module is safer as the asset base grows.

What happens to fully depreciated assets?

Fully depreciated assets stay in the register at cost and accumulated depreciation, with nil net book value, as long as they are in use. When they are scrapped or sold, remove both cost and accumulated depreciation and record any sale proceeds or scrap value.

Should the register include intangible assets?

Yes. Capitalised software licences, registered trademarks, patents, website development costs that qualify for capitalisation and acquired goodwill should be recorded with their amortisation under AS 26 or Ind AS 38. CARO 2020 clause 3(i)(a)(B) asks specifically about records of intangible assets.

How do I reconcile the register with the general ledger?

At each month or year end, total the register's gross block, accumulated depreciation and net book value by class, and agree them with the fixed asset and depreciation ledgers. Investigate any difference, which usually comes from additions posted to the ledger but not the register, or disposals recorded in only one.

What are common audit findings on fixed assets?

Frequent findings include no register or one not updated, assets not tagged or verified, title deeds not in the company's name, additions expensed or expenses capitalised wrongly, depreciation from the purchase date instead of the put-to-use date, and register totals not agreeing with the ledger.

Do proprietorships and partnership firms need a fixed asset register?

They are not covered by CARO, but a register is needed to compute book depreciation, tax depreciation by block and capital gains on sale, and the non-corporate financial statements format requires a class-wise reconciliation of property, plant and equipment. A simple register serves all three purposes.

How long should fixed asset records be kept?

Companies must preserve books of account and supporting records for at least eight years under Section 128(5) of the Companies Act, 2013. Because assets can stay in use for decades, keep the purchase invoices and register entries for each asset for as long as the asset is held plus the retention period.

Can useful lives be changed after an asset is recorded?

Yes, if a review shows the original estimate no longer reflects expected use. A change in useful life is a change in accounting estimate, applied prospectively to the remaining carrying amount, and disclosed in the financial statements. It does not restate earlier years' depreciation.

How does an Ind AS company's register differ?

Ind AS companies follow Ind AS 16 for property, plant and equipment, with annual review of useful lives, residual values and depreciation methods, component accounting, and Ind AS 116 for right-of-use assets. The register needs fields for these reviews and, where the revaluation model is used, revalued amounts.

What is the WDV depreciation formula under Schedule II?

The WDV rate is 1 minus the residual value divided by cost, raised to the power of 1 divided by the useful life. With a 5% residual value, this gives 18.10% for a 15-year life, 25.89% for 10 years, 31.23% for 8 years and 63.16% for 3 years.

Are Schedule II WDV rates the same as income tax rates?

No. Schedule II WDV rates are derived from useful life and residual value, such as 18.10% for general plant. Income tax rates are fixed block rates under the Income-tax Rules, such as 15% for plant and machinery and 40% for computers. Companies keep separate book and tax depreciation schedules.

What is a practical first step for a business without a register?

Start from the fixed asset ledger balance, list every asset supported by invoices, physically verify and tag them, and reconcile the list with the ledger. Treat items that cannot be found as discrepancies to investigate and write off with approval, then maintain the register monthly from that base.

Frequently Asked Questions

What is a fixed asset register?

A fixed asset register (FAR) is a detailed record of every item of property, plant and equipment and intangible asset a business owns, with its cost, acquisition and put-to-use dates, location, custodian, useful life, depreciation and disposal details. It supports the fixed asset figures in the financial statements and the audit.

Is a fixed asset register mandatory?

For companies covered by CARO 2020, the auditor reports under clause 3(i) whether the company maintains proper records showing full particulars, including quantitative details and situation of property, plant and equipment, and of intangible assets. In practice, every company needs a register to compute depreciation under Schedule II.

What fields should a fixed asset register contain?

Core fields are a unique asset ID or tag number, description, asset class, location, custodian, supplier, invoice number and date, put-to-use date, cost, useful life, residual value, depreciation method, opening and closing accumulated depreciation, net book value, tax block and disposal details.

What is Schedule II of the Companies Act?

Schedule II to the Companies Act, 2013 prescribes useful lives for classes of assets for computing depreciation under Section 123. Companies may adopt a different useful life or residual value if they disclose and justify it, and must apply component accounting for significant parts with different lives.

What are the Schedule II useful lives for common assets?

Examples include 60 years for non-factory RCC buildings, 30 years for factory buildings, 15 years for general plant and machinery, 10 years for furniture and fittings, 5 years for office equipment, 3 years for end-user computers, 6 years for servers and networks, and 8 years for motor cars.

What residual value applies under Schedule II?

Schedule II indicates that the residual value of an asset is ordinarily not more than 5% of its original cost. A company using a higher residual value must disclose and justify it in its financial statements. Depreciation is charged on cost less residual value over the useful life.

Should depreciation be straight-line or written down value?

Schedule II allows either method, provided it reflects how the asset's benefits are consumed and is applied consistently. Many companies use straight-line for buildings and machinery and written down value for computers and vehicles. A change in method is a change in estimate, disclosed in the accounts.

What is component accounting?

Component accounting means depreciating significant parts of an asset separately where they have different useful lives, such as an aircraft's engines and airframe, or a building's lifts and structure. Schedule II requires it where the cost of a part is significant relative to the total cost of the asset.

How is depreciation calculated for assets bought during the year?

Under Schedule II, depreciation for additions is calculated pro rata from the date the asset is available for use. A machine put to use on 1 October in a year ending 31 March gets six months of depreciation for that year, regardless of when it was purchased.

What are income tax depreciation rates for FY 2025-26?

Under the Income-tax Act, 1961 and Appendix I of the Income-tax Rules, common rates on written down value include 10% for buildings (5% for residential), 10% for furniture, 15% for general plant and machinery and motor cars, 40% for computers and 25% for intangibles. Rates apply to each block of assets.

What is the 180-day rule for tax depreciation?

If an asset is acquired and put to use for less than 180 days in the previous year, tax depreciation for that year is allowed at half the normal rate under the second proviso to Section 32(1). The balance is effectively claimed in later years through the block's written down value.

Why do book depreciation and tax depreciation differ?

Book depreciation follows Schedule II and the company's estimate of useful life; tax depreciation follows Section 32 rates on blocks of assets. The difference creates a timing difference, which gives rise to deferred tax under AS 22 or Ind AS 12. The register should track both.

What is a block of assets?

A block of assets is a group of assets in the same class with the same tax depreciation rate, such as all plant and machinery at 15%. Tax depreciation is computed on the block's written down value, adjusted for additions and sale proceeds, rather than asset by asset.

What is the capitalisation threshold?

A capitalisation threshold is the minimum cost above which an item is recorded as a fixed asset rather than expensed. The Act does not prescribe one; companies set it in their accounting policy based on materiality, apply it consistently, and disclose it. Items below the threshold are expensed when bought.

How often should fixed assets be physically verified?

CARO 2020 clause 3(i)(b) asks whether assets were physically verified by management at reasonable intervals and whether material discrepancies were dealt with. Many companies verify all assets once a year, or cover all assets over a cycle of up to three years with high-value items verified annually.

What is asset tagging?

Asset tagging is fixing a unique identifier, such as a numbered label, barcode or RFID tag, to each physical asset and recording that identifier in the register. Tags make verification faster and link each physical item to its cost, location and custodian.

How are title deeds reported under CARO?

Clause 3(i)(c) requires the auditor to report whether title deeds of immovable property disclosed in the financial statements are held in the company's name, and if not, to give details. Schedule III also requires disclosure of such properties. Keep copies of title deeds with the register.

How is the sale of a fixed asset recorded?

Remove the asset's cost and accumulated depreciation from the register and ledger, record the sale proceeds, and recognise the difference as profit or loss on sale in the statement of profit and loss. For tax, deduct the sale proceeds from the block's written down value.

Is GST payable on the sale of a used fixed asset?

Yes. Sale of capital goods is a taxable supply. Under Section 18(6) of the CGST Act, where credit was taken on the asset, the business pays the higher of the credit taken reduced by 5 percentage points per quarter since purchase, or the tax on the transaction value.

How is GST on capital goods treated in the register?

Where input tax credit is available, the asset is recorded at cost excluding GST, and the tax goes to input tax ledgers. Where credit is blocked or not claimed, GST forms part of the asset's cost. If depreciation is claimed on the GST component for income tax, credit is not available under Section 16(3).

What is impairment of fixed assets?

Impairment occurs when an asset's carrying amount exceeds its recoverable amount, which is the higher of net selling price and value in use. Under AS 28 or Ind AS 36, companies test for impairment where indicators exist, such as damage, obsolescence or falling demand, and recognise a loss.

How is capital work-in-progress tracked?

Capital work-in-progress records costs of assets under construction or installation until they are ready for use. Track each project separately with its costs and expected completion date, and transfer to the register on the put-to-use date. Schedule III requires an ageing schedule for capital work-in-progress.

How are leased assets shown in the register?

Under AS 19, assets taken on finance lease are recorded as assets with a corresponding liability and depreciated; operating lease assets are not. Under Ind AS 116, most leases create a right-of-use asset. Record right-of-use assets in a separate section of the register with lease terms.

Can a spreadsheet be used as a fixed asset register?

Yes, for smaller businesses, if it is controlled: locked formulas, versioning, reconciliation with the ledger and a change log. Companies must also meet the audit trail requirement for accounting software, so maintaining the register within the accounting system or a dedicated module is safer as the asset base grows.

What happens to fully depreciated assets?

Fully depreciated assets stay in the register at cost and accumulated depreciation, with nil net book value, as long as they are in use. When they are scrapped or sold, remove both cost and accumulated depreciation and record any sale proceeds or scrap value.

Should the register include intangible assets?

Yes. Capitalised software licences, registered trademarks, patents, website development costs that qualify for capitalisation and acquired goodwill should be recorded with their amortisation under AS 26 or Ind AS 38. CARO 2020 clause 3(i)(a)(B) asks specifically about records of intangible assets.

How do I reconcile the register with the general ledger?

At each month or year end, total the register's gross block, accumulated depreciation and net book value by class, and agree them with the fixed asset and depreciation ledgers. Investigate any difference, which usually comes from additions posted to the ledger but not the register, or disposals recorded in only one.

What are common audit findings on fixed assets?

Frequent findings include no register or one not updated, assets not tagged or verified, title deeds not in the company's name, additions expensed or expenses capitalised wrongly, depreciation from the purchase date instead of the put-to-use date, and register totals not agreeing with the ledger.

Do proprietorships and partnership firms need a fixed asset register?

They are not covered by CARO, but a register is needed to compute book depreciation, tax depreciation by block and capital gains on sale, and the non-corporate financial statements format requires a class-wise reconciliation of property, plant and equipment. A simple register serves all three purposes.

How long should fixed asset records be kept?

Companies must preserve books of account and supporting records for at least eight years under Section 128(5) of the Companies Act, 2013. Because assets can stay in use for decades, keep the purchase invoices and register entries for each asset for as long as the asset is held plus the retention period.

Can useful lives be changed after an asset is recorded?

Yes, if a review shows the original estimate no longer reflects expected use. A change in useful life is a change in accounting estimate, applied prospectively to the remaining carrying amount, and disclosed in the financial statements. It does not restate earlier years' depreciation.

How does an Ind AS company's register differ?

Ind AS companies follow Ind AS 16 for property, plant and equipment, with annual review of useful lives, residual values and depreciation methods, component accounting, and Ind AS 116 for right-of-use assets. The register needs fields for these reviews and, where the revaluation model is used, revalued amounts.

What is the WDV depreciation formula under Schedule II?

The WDV rate is 1 minus the residual value divided by cost, raised to the power of 1 divided by the useful life. With a 5% residual value, this gives 18.10% for a 15-year life, 25.89% for 10 years, 31.23% for 8 years and 63.16% for 3 years.

Are Schedule II WDV rates the same as income tax rates?

No. Schedule II WDV rates are derived from useful life and residual value, such as 18.10% for general plant. Income tax rates are fixed block rates under the Income-tax Rules, such as 15% for plant and machinery and 40% for computers. Companies keep separate book and tax depreciation schedules.

What is a practical first step for a business without a register?

Start from the fixed asset ledger balance, list every asset supported by invoices, physically verify and tag them, and reconcile the list with the ledger. Treat items that cannot be found as discrepancies to investigate and write off with approval, then maintain the register monthly from that base.

Discuss This With ProTax

FROM THE PROTAX LIBRARY

Recent Articles & Guides

Practical reading on business records, tax filings and the decisions that come with running a company.

Newsletter

Stay ahead on compliance, tax & business updates

Get selected business and compliance updates by email. Once a month, no spam.

  • 100% privacy
  • 1 email / month
  • Unsubscribe anytime
Contact ProTax
Chosen by individuals and businesses

Get Help With Your Business

Tell us what you need help with. Our team will review your enquiry and explain the next steps.

Free Consultation No Obligations Expert Advice
FREE Consultation Get Started @ ₹299 ₹0

Talk To ProTax

Share Your Business Requirement

Instant Response 100% Confidential Expert Advice
FREE Consultation Get Started @ ₹299 ₹0

Request a Free Quote

Share Your Business Requirement

Instant Response 100% Confidential Expert Advice